Overtop Cultivator
BASELIER Overtop Cultivator buried stones and clods under the seedbed and cultivating of grass-land and other stubbles.
UKF: Driven on one side
Type | WORKING WIDTH | SPIKES | FINGERS | LXBXH cm | WEIGHT KG | POWER HP |
---|---|---|---|---|---|---|
UKF 180 | 180 cm | 50 | 31 | 220x230x150 | 1900 | 70/90 |
UKF 200 | 200 cm | 54 | 35 | 220x250x150 | 2000 | 80/110 |
UKF 250 | 250 cm | 68 | 43 | 220x300x150 | 2200 | 160/230 |
UKF 300 | 300 cm | 84 | 51 | 220x230x150 | 2800 | 160/190 |
UKFBW: Driven both sides without middle bearing
Type | WORKING WIDTH | SPIKES | FINGERS | LXBXH cm | WEIGHT KG | POWER HP |
---|---|---|---|---|---|---|
UKFBW 300 | 300 cm | 84 | 51 | 220x230x150 | 3000 | 160/230 |
UKFB: Driven both sides with middle bearing
Type | WORKING WIDTH | SPIKES | FINGERS | LXBXH cm | WEIGHT KG | POWER HP |
---|---|---|---|---|---|---|
UKFB 300 | 300 cm | 80 | 51 | 220x230x150 | 3000 | 160/230 |
UKFB 380 | 365 cm | 100 | 62 | 220x414x150 | 3300 | 200/280 |
UKFB 460 | 450 cm | 120 | 80 | 220x524x150 | 3600 | 280/340 |
UKFB 550 | 540 cm | 152 | 90 | 220x590x150 | 4320 | 320/400 |
UKFB 600 | 600 cm | 164 | 100 | 220x650x150 | 4800 | 320/400 |
- UKF drive on one side, 1 PTO shaft W2500 with auto reset clutch 1 3/8’ – 6 splines, gearbox 250 HP – 1000 RPM, rotor shaft 250 RPM Ø 75 cm
- UKFBW driven on both sides, without middle bearing, 1 PTO shaft P600 with auto reset clutch 1 3/4’- 20 splines, gearbox 280 HP – 1000 RPM, rotor shaft 250 RPM Ø 75 cm
- UKFB driven on both sides, with middle bearing, 3 PTO shafts P600 with auto reset clutch 1 3/4’ – 20 splines, gearbox 310 HP – 1000 RPM
- Spikes with hard metal plate, mounted on plates welded on rotor shaft – 250 RPM Ø 75 cm
- Very good crumbling of heavy soil, clods under and fine ground on top
- Also for use on light stony soil
- Without packer roller, crumble roller, ridging hood or wheels
- 3-point connection Cat III
UKF – UKFBW – UKFB
Order no | Description | Photo |
---|---|---|
UKF5100 | Level beam front with spindle adjustment less than 18 cm deep work 200×100 | |
UKF5101 | Ridging hood 4×75 cm with spindle adjustment UKF 300 | |
UKF5120 | Ridging hood 4×90 cm with spindle adjustment UKFB 380 | |
FK00410 | Gearbox 450 HP, 3 PTO shafts P700 for UKFB, stronger drive line | |
FK03902-1 | Length transport for UKFB 600 with extra frame at the back for depth control | |
FKL97518 | High speed plates stainless steel 4FK 310 4×75 cm | |
FK099025 | High speed plates stainless steel 4FK 380 4×90 cm | |
FKL2308 | Plastic plate for High speed 4×75 cm | |
FK012308 | Plastic plate for High speed 4×90 cm | |
UKF5102 | Crumbler roller Ø 50 cm with spindle adjustment – UKF 200 | |
UKF5103 | Crumbler roller Ø 50 cm with spindle adjustment – UKF 250 | |
UKF5104 | Crumbler roller Ø 50 cm with spindle adjustment – UKFB 300 | |
UKF5105 | Crumbler roller Ø 50 cm with spindle adjustment – UKFB 380 | |
UKF5106 | Packer roller Ø 51 cm with spindle adjustment – UKF 200 | |
UKF5107 | Packer roller Ø 51 cm with spindle adjustment – UKF 250 | |
UKF5108 | Packer roller Ø 51 cm with spindle adjustment – UKFB 300 | |
UKF5109 | Packer roller Ø 51 cm with spindle adjustment – UKFB 380 | |
UKF5110 | Air wheels (set) 6.50 x 10 – 10PR with spindle adjustment on frontside UKF 200×100 | |
UKF5121 | Cleaning system on finger chassis – 2 hydraulic hoses |